-
Trailer Anchor Drill for drilling tie downs for mobile homes, sheds, RV’s, etc -
• Perfect for small footings, bases, patching, fence post • Thick polyethylene drum - Resists rust and dents • 3 cf mixing capacity -
- The Bobcat E20 compact excavator is a zero-tail swing machine in the size class of 1-to-2 metric tons. Its zero tail-swing design gives you better maneuverability with minimal repositioning.
- Hydraulically retract the undercarriage to just 39 inches to traverse property lines, gates and other challenging access points, then return the undercarriage to a width of 53½ inches for great jobsite performance.
- Operating Weight 4,306 lb
- Maximum Reach at Ground Level 167.9"
-
- Ice Pack for added cooling effect
- 4-Way airflow with auto vertical louver and manual horizontal louver
- High efficiency 1/3 HP motor quiet fan operation
- Manual fill and garden hose attachment with float valve auto shut-off
- 3-Sided high efficiency rigid media pads
- Ideal for indoor and outdoor spaces up to 1300 sqft
-
RENTAL RATES $120 - 4Hr $130 - Daily $520 - Weekly $1,560 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Operational Features: 1,730 RPM / 1.5 HP Electric Motor Runs on 15 Amps Direct Drive to the Plate Automatically Adjusting Shroud Removable Shroud Sections Water Connection for Wet Grinding Foldable Handle for Easy Transportation Adjustable Wheels for Level Grinding Vacuum Port -
Product Specs Model #: VSCD-1 Rated Voltage: 120V AMPS: 15 Rated Frequency: 50/60HZ Rated Input Power: 2000W No-Load Speed: RPM: 0-1950 r/min Weight: 6.5kg (14.33 lbs). -
Door Jamb Saw Used for cutting door jambs and floor molding for instalation of thick floor tile. Please contact us for current pricing and availability. -
Blades 14 x 3/16 x 1D Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability. -
Griding blocks used with our gasoline powered concrete grinder. Comes in a variety of grits. Please contact us for current pricing and availability. -
Blocks Floor Grinding 2x2x4 10-grit Please contact us for current pricing and availability. -
Designed for the compaction of asphalt as well as granular and mixed materials with some cohesive content in confined areas such as parking lots, highway and bridge construction, next to structures, curbs and abutments. Large capacity polyethylene water tank located within the front lift cage for protection and is semi-transparent for easy check of the water level. Large in-tank water filter • Operating weight 203 lbs. • Plate width 19.5" • 5.5 HP • Centrifugal force 3375 lbs. • Frequency 6000 VPM • Speed 100 ft/min • Ft²/h 9750 Please contact us for current pricing and availability. -
19" aeration width with free-wheeling tines for easy turns. Aerates 21,900 sq ft/hr. Folding handle and 2 removable weights 19" Aerator, Honda GX120, 3.5HP Please contact us for current pricing and availability. -
Dry areas quickly with this compact, three-speed blower. Quickly dry carpet, hard floors, fresh paint, concrete sealer and much more. Ensure durability and many years of use with this blower's rotationally-molded body Blower - Three-speed Air Mover 1/2 Horsepower, Three speeds, Stackable, Rotomolded durability. ETL US/C Please contact us for current pricing and availability. -
RENTAL RATES $50 - 4Hr $60 - Daily $240 - Weekly $720 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Sheets QuickSand 12 x 18 20-grit Please contact us for current pricing and availability. -
Rubber track Skid loader - allows you to use loader bucket, pallet forks and hydraulic concrete breaker Please contact us for current pricing and availability. -
Sheets QuickSand 12 x 18 60-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 36-grit Please contact us for current pricing and availability.
-
Unit comes with it's own trailer. 2" ball required Attachments: Tiller, Auger, pallet forks, bucket • 25 HP • 2610 lbs Please contact us for current pricing and availability. -
14" Metal Cutting Chop saw used for cutting any ferrous metals such as rebar, steel studs, pipe, threaded rod, angle iron, etc • Powerful 15.0 Amp/5.5 HP (maximum motor HP) motor provides more overload capacity, increasing performance and durability. • QUIK-CHANGE™ Blade Change System increases productivity by providing the user the ability to change wheels without a wrench. • Exclusive QUIK-FENCE™ tool-free, 45° adjustable fence allows for fast and accurate angle cuts without using a wrench. • Quick-Lock Vise allows for fast clamping on different size materials to increase productivity. • Soft start extends gear and motor life by reducing start up torque. • Large cutting capacity (5" round / 4-1/2" x 6-1/2" rectangle) provides the ability to cut a wide variety of materials Please contact us for current pricing and availability. -
Roof Pro 455XP Coil Roofing Nailer Please contact us for current pricing and availability. -
Sheets QuickSand 12 x 18 100-grit Please contact us for current pricing and availability.
-
Sheets QuickSand 12 x 18 80-grit Please contact us for current pricing and availability.
-
RENTAL RATES $60 - 4Hr $70 - Daily $280 - Weekly $840 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
RENTAL RATES $40 - 4Hr $45 - Daily $180 - Weekly $540 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Discs Abrasive Mesh Screen 17 100-grit Please contact us for current pricing and availability. -
Discs Abrasive Mesh Screen 17 60-grit Please contact us for current pricing and availability.
-
Built for high torque applications like grinding on concrete floors or sanding wood floors. Use with 17" green scrubbing pads to clean VCT, linoleum, Tile, and brick floors. Please contact us for current pricing and availability. -
Sheet Abrasive Mesh Screen 12 x 18 80-grit Please contact us for current pricing and availability. -
Discs Abrasive Mesh Screen 17 150-grit Please contact us for current pricing and availability.
-
Stomper XH670 lightweight rammer with an impact force of 2650 lbs. Lightweight, smooth running and easy to operate Stone Stompers deliver maximum impact force, superior handling, control and reliability. Ideal for compaction of small trenches, utility and piping work, along abatements and walls. * Powered by Honda GX100 with a float carburetor * Shoe size 10" x 13" * Impact force 2650 lbs. * Max. blows/min 727. * Specially-designed carburetor for the 4-cycle models allows the Stomper to be laid down and picked up and keep on running. * Select from either a float or diaphragm carburetor depending on operating preference. * Precision components including forged pistons and solid snubbers provide extra reliability and durability. * Exclusive modular design cuts service time in half. * Quadruple fuel filtration system reduces job site fuel contamination for more run time and longer life. * Dual stage, top mounted air filtration system provides optimum air flow to reduce engine wear and extend life. * An innovative, snap-on contoured hood delivers a dynamic sound absorbing system. * Convenient lifting handles and optional wheels that attach to the handle provide easier mobility in or out of truck beds. Please contact us for current pricing and availability. -
Sheet Abrasive Mesh Screen 12 x 18 150-grit Please contact us for current pricing and availability.
-
Sheet Abrasive Mesh Screen 12 x 18 100-grit Please contact us for current pricing and availability.
-
CF364 36" Power Trowel offers precision handling for the professional concrete finisher and include patented features not available on any other brand. * Powered by Honda GX240 * 4 Blade with combination blades * Positive blade positioning, infinitely variable blade leveler * Contoured adjustable handle. * Lightweight Edger Trowel with a cast aluminum rotating edger ring that allows the trowel to run along walls without scuffing or gouging. * Dynamically balanced with a low center of gravity provides stability and smooth operation. * Patented Dyna-Clutch® safety feature stops blade rotation independent of the engine for safe operation. * * Adjustable body contoured handle with cushioned hand grips provide comfort and control for any operator. * Comes assembled and balanced from the factory. Please contact us for current pricing and availability. -
Pads White Polish 13 x 1 Please contact us for current pricing and availability. -
Pads Green Scrub 13x1 Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability. -
Pads Red Buffer 17 x 1 Please contact us for current pricing and availability.
-
Pads Black Stripper 17 x 1 Please contact us for current pricing and availability.
-
General purpose water suction hose for contractors, industrial, and agricultural service. Black smooth EPDM blend rubber tube, fabric plies, and steel wire spiral for full vacuum service. Temperature range: -10°F to 180°F. W/P 125# Please contact us for current pricing and availability.
-
Pads Green Scrub 17x1 Please contact us for current pricing and availability.
-
Pads White Polish 17x1 Please contact us for current pricing and availability.
-
Pads Black Stripper 12x18x1 Please contact us for current pricing and availability. -
Pads Green Scrubber 12x18x1 Please contact us for current pricing and availability.
-
Bobcat Grapple AttachmentPlease contact us for current pricing and availability.
-
Pads White Polish 12x18x1 Please contact us for current pricing and availability.
-
• Fits Bobcat Skid Loaders and Excavators • Bit sizes - 6", 9", 12",16", 24" & 36" - bits are 48" long • 4ft extension available Please contact us for current pricing and availability. -
For use with handheld concrete saws.- Virgina Abrasives Blades 14 x 1/8 x 1 Abrasive Cut Off Wheels-Concrete.
-
Blades 12 x 1/8 x 1 Abrasive Cut Off Wheels-Concrete Please contact us for current pricing and availability.
-
Welder/GeneratorPlease contact us for current pricing and availability.
-
14" Abrasive blade used for cutting metal. For use with handheld saws.- Virgina Abrasives Blades 14 x 1/8 x 1 Abrasive Cut Off Wheels-Metal
-
Blades 14 x 3/32 x 1 Abrasive Chop Saw Wheels-Metal Please contact us for current pricing and availability. -
10'6" aluminum siding brake • Used by both professional and DIY customers to bend flat metal into profiles used in roofing and siding of residential and commercial construction • Mark I & II series brakes have a 14” throat depth and are capable of bending & hemming .019-.032 aluminum as well as 16 oz copper, 29 ga.-32 ga. steel • These brakes also work with any of our accessories and are a must for anyone working with aluminum, vinyl siding, and roofing Please contact us for current pricing and availability. -
Sheets General Purpose VA8 Clarke 8x19-1/2 12-grit Please contact us for current pricing and availability. -
RENTAL RATES $100 - 4Hr $120 - Daily $480 - Weekly $1,440 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 16-grit Please contact us for current pricing and availability.
-
Manual Pipe Threader 1/4" NPT - 2" NPT Threads. Please contact us for current pricing and availability. -
Desa 110,000 BTU Kerosene/Diesel fan forced heat Please contact us for current pricing and availability. -
Sheets General Purpose VA8 Clarke 8x19-1/2 36-grit Please contact us for current pricing and availability.
-
Tri-Pod chain lock pipe vice up to 4" pipePlease contact us for current pricing and availability.
-
Bobcat fork attachment Pallet fork attachment Please contact us for current pricing and availability. -
Vibratorty Plate Vibratory Plate Packer Please contact us for current pricing and availability. -
Sheets General Purpose VA8 Clarke 8x19-1/2 60-grit Please contact us for current pricing and availability.
-
Ridgid Cutter/Threader Ridgid 535 Pipe Threader from 1/4" NPT to 2" NPT Please contact us for current pricing and availability. -
Sidewalk EdgerJohn Deere sidewalk edgerPlease contact us for current pricing and availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 80-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 20-grit Please contact us for current pricing and availability. -
Edco Air Floor ScraperEdco Air Floor ScraperPlease contact us for current pricing and availability.
-
RENTAL RATES $70 - 4Hr $80 - Daily $320 - Weekly $960 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Sheets General Purpose VA8 Clarke 8x19-1/2 100-grit Please contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 36-grit Please contact us for current pricing and availability.
-
Lawn RollerLawn Roller 24" and 36" long drum filled with water for weight to gain compactionPlease contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 60-grit Please contact us for current pricing and availability.
-
Electric Threader from 1/4" NPT - 1-1/2" NPTElectric Threader From 1/4" NPT - 1-1/2" NPTPlease contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 80-grit Please contact us for current pricing and availability.
-
Car Jack StandCar Jack Stand from 2 ton - 5 tonPlease contact us for current pricing and availability.
-
Discs 6-7/8xNH E-Z Edger Floor Sanding Discs General Purpose 100-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 16-grit Please contact us for current pricing and availability. -
Ridgid Pony 700 Threader Ridgid Pony 700 Pipe Threader 1/4" NPT - 2" NPT Electric Pipe Threader. Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 7 x 7/8 20-grit Please contact us for current pricing and availability. -
National Pipe thread Die HeadNPT die heads from 1/4" NPT - 2" NPT die headsPlease contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 36-grit Please contact us for current pricing and availability.
-
framing nailer Duo-fast framing nailer for 21 degree framing nails Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 7 x 7/8 60-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 80-grit Please contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 7 x 7/8 100-grit Please contact us for current pricing and availability.
-
Pole prunner has a 12" blade and is 8' in lenghtPlease contact us for current pricing and availability.
-
Discs General Purpose Floor Sanding 17 x 2 16-grit Please contact us for current pricing and availability. -
Simplex Aluminum 10 ton railroad jack has 20" stroke for lifting houses, sheds, machinery and has pickup point at 2" and 24 " Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 17 x 2 20-grit Please contact us for current pricing and availability.
-
28" wide x 5' high x 7' long Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 17 x 2 36-grit Please contact us for current pricing and availability.
-
scaffolding is 5' wide x 6' high x 7' long Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 17 x 2 60-grit Please contact us for current pricing and availability.
-
RENTAL RATES $200 - 4Hr $225 - Daily $900 - Weekly $2,700 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
The genie Duct lift heigth is 21' Please contact us for current pricing and availability. -
Discs General Purpose Floor Sanding 17 x 2 80-grit Please contact us for current pricing and availability.
-
RENTAL RATES $65 - 4Hr $75 - Daily $300 - Weekly $900 - Monthly WEEKEND SPECIAL: Friday 3:00pm - Monday 9:00am (1.5x Day Rate) Taxes, Damage Waiver, and Refundable Deposit NOT INCLUDED!
Please contact us for availability.
-
Builders level with tri-pod and Rod. 1/4" accuracy at 500'Please contact us for current pricing and availability.