Please contact us for current pricing and availability.
-
Whether you're a contractor or do-it-yourselfer, this air compressor will suit your needs. -
13.1 CFM @ 100 PSI, Wheelbarrow Compressor, 8 Gallon Storage Capacity, 196cc Honda GX200 OHV With Low Oil Shut Down, Stainless Discharge Hose • 196cc Honda GX200 OHV With Low Oil Shut Down • 13.1 CFM @ 100 PSI, Wheelbarrow Compressor • 8 Gallon Storage Capacity • Stainless Discharge Hose Please contact us for current pricing and availability. -
Jackson® wheelbarrows are the professionals' choice for superior quality, value and performance. Heavy duty steel trays, professional grade steel undercarriages and strong hardwood handles add up to the toughest, most dependable wheelbarrows on the jobsite. Don't compromise, choose Jackson and get the job done.Please contact us for current pricing and availability.
-
Comes with 7ft. shaft. When concrete consolidation is required for remote or mobile applica-tions, there's nothing like a Northrock Backpack Vibrator System. These units are designed for use where electrical power is not conveniently available or for applications where extra mobility is desired. No tangled air hoses or electrical extension cords.Northrock Backpack Vibrators offer just the right 10,000 vpm mid-frequency and force characteristics required to set material particles in motion quickly for rapid consolida-tion of homogenous mixes without destroying important freeze-thaw pressure-relief chains produced by small air bubbles. Northrock concrete vibrators are designed to maintain these optimum frequencies regardless of slump, head diameter or other load conditions.Please contact us for current pricing and availability.
-
- 2-1/2” square column (mast) with black oxidized finish
- 6” wheels for easy mobility
- Dual switch/outlet control panel with amp meter (except for CB700 models with LED amp meter)
- Vacuum pump for quick mounting to flat surface without drilling an anchor hole (included with combination rig)
- 4 leveling screws on the base
- Up to 14” bit capacity with one spacer block
- Slide handle allows for drilling in tight areas
- Combination base is a quick change over from vacuum to anchor base
- Ceiling jack helps keep the rig in place as a backup for anchoring or vacuuming the base down (used with a brace piece-2 x 4 or other material)
-
Product Specs Model #: VSCD-1 Rated Voltage: 120V AMPS: 15 Rated Frequency: 50/60HZ Rated Input Power: 2000W No-Load Speed: RPM: 0-1950 r/min Weight: 6.5kg (14.33 lbs). -
We offer a variety of bits and chisels for this tool.If an added chiseling function is what you need, the TE 30-C-AVR is the ultimate general purpose, get-it-done tool. And with 2/3 less vibration than the conventional tools, you will not only get it done in style but with less user fatiguePlease contact us for current pricing and availability.
-
We offer a variety of bits and chisels for this tool. CombiHammer TE 70 ATC - 120VDrilling range 1/2"-6". Optimal drilling range 7/8 - 1 3/4"Please contact us for current pricing and availability.
-
90# air concrete breaker Please contact us for current pricing and availability. -
Hydraulic breaker Attachment fits either Excavators or skidloaders Please contact us for current pricing and availability. -
Highest-in-class demolition power with AVT(Anti-Vibration Technology). Counter weight mechanism and vibration absorbing housing helps to reduce vibration. Suppression of motor speed during no-load reduces vibration of tool body when idling. Soft start for suppressing start-up reaction. Soft grip provides more control and less hand fatigue.Please contact us for current pricing and availability.
-
3 inch centriugal pump, Koshin K180 engine 3", 180 cc engine, 246 GPM 5.5 H.P. Gas Engine. requires suction and discharge hoses Please contact us for current pricing and availability. -
2 inch semi-trash pump, Honda GX120 engine 2", 118 cc engine, 158 GPM 4 H.P. gas engine requires suction and discharge hose Please contact us for current pricing and availability. -
for pressure washing high areas. Please contact us for current pricing and availability. -
3500 PSI @ 3.5 Gallons per minute. unit come with 50' hose, wand, soap injector and 4 tips Please contact us for current pricing and availability. -
2700 PSI @ 3 gallons per minute. unit comes with 50' hose, wand, soap injector and 4 tips Please contact us for current pricing and availability.
-
2000 Psi @ 3.5 gallon Per Minute pressure washer. come with 50' hose, wand, soap injector and 4 tips. Please contact us for current pricing and availability.
-
One-step solution. The Jarvis Series SCW 2.4/25 G is a complete solution for quick, streak-free cleaning of business entrances, parking lots, tennis courts, pool decks and sidewalks. This easy to use cold water surface cleaner pressure washer is an all-in-one unit with the pump and Honda® GX engine attached to the surface cleaner, and it is designed to attack the superficial dirt sweeping alone does not get. The Jarvis series surface cleaner pressure washer is perfect for all operators - simple on/off operation, flat-free tires, and a folding handle for easy transport and storage. -
Bosh brute 60# Elactric BreakerPlease contact us for current pricing and availability.
-
18 Gallon wet/dry shop vac Please contact us for current pricing and availability. -
Ideal for grinding concrete, removing coatings in areas greater than 1500 sq ft. Dual Disc Gas Grinder with a 11 HP Honda engine Please contact us for current pricing and availability. -
It is a versatile grinder for both aggressive and fine grinding of concrete and natural stone surfaces and also very effective in removing impurities, like paint and carpet residues. SC 450 is a flexible and easy to use grinding machine. Although the machine is light it still has a robust and stable construction made of steel, which makes it very durable and steady to operate. The construction with spring-steel flex heads reduces the vibrations and allows the machine to grind rough surfaces with minimal effort.Please contact us for current pricing and availability.
-
Operational Features: 1,730 RPM / 1.5 HP Electric Motor Runs on 15 Amps Direct Drive to the Plate Automatically Adjusting Shroud Removable Shroud Sections Water Connection for Wet Grinding Foldable Handle for Easy Transportation Adjustable Wheels for Level Grinding Vacuum Port -
7" edge sander. Complete with carrying case and paper changing tool. Aggressive, professional results Please contact us for current pricing and availability -
12" x 18" Orbital Polisher/refinisher allows the DIYer to do the jobs of a rotary polisher with ease! various grit sand paper is available• 12" X 18" plate with 1HP motor • rubber towers in the corners • large orbital action, aluminum chassis - Made in USAPlease contact us for current pricing and availability.
-
This multi-purpose sander is designed for resurfacing hardwood floors, and exterior wooden decks. Its unique belt drive, three-head system is designed for smooth operation with superior results. This Unit comes with a vacuum system that captures the majority of the dust making clean up a breeze!Please contact us for current pricing and availability.
-
8" drum sander with an expandable drum. Removable handle and dust shoot makes for easy transportation. Drum lowering handle keeps the unit on a steady three point stance and delivers smooth cutting to the floor. This sander can be hooked into a tank vacuum Please contact us for current pricing and availability. -
Built for high torque applications like grinding on concrete floors or sanding wood floors. Use with 17" green scrubbing pads to clean VCT, linoleum, Tile, and brick floors. Please contact us for current pricing and availability. -
Experience the agility of a 17 inch wide cleaning path and the added convenience of a 65 foot safety yellow power cord to improve your cleaning productivity! Engineered for heavy daily use in a variety of commercial applications, the CA30 17E features a heavy-duty cast aluminum assembly housing a rounded squeegee that delivers quick, complete solution pick-up day in and day out.Please contact us for current pricing and availability.
-
The new CTS12 Gen 2 RIP-R-STRIPPER® is highly productive for removing ceramic tile, hardwood flooring and other materials from cement surfaces. Breaks through today’s high bond strength mastics, glues and thinsets for both commercial and DIY projects.Please contact us for current pricing and availability.
-
Quickly remove VCT tiles, rubber-backed carpeting and sheet type coverings from wood and concrete surfaces. Adjust blade attack angle on-the-fly using the Back-Saver™ Blade Control System for maximum productivity. The exclusive blade clamping system prevents unwanted floor material under clamp build ups further improving long term maintenance costs. Welded, unitized frame. Centralized bearing lubrication system. Adjustable operator handle with quick release feature folds for easy transport.Please contact us for current pricing and availability.
-
A range of mixers for the professional and rental users. Built for site durability, these are quality, portable mixers for all small to medium building projects. The number one choice for mixers worldwide.- Compact and portable for easy transportation.
- Mixes a full barrow load of concrete or mortar.
- Complete with barrow height swivel and stand.
- Full thermal overload protection.
- Proven robust and durable design.
- Extra thick drum with quick mix paddles.
- Heavy-duty sealed cast gearbox for longer life. Belle Group Minimix
Please contact us for current pricing and availability.
-
• 9 cubic foot capacity • Towable unit - 2" receiver • Poly drum Please contact us for current pricing and availability. -
Engineered for the concrete professional. Allen Pro-Series Walkers feature precision engineered gearboxes for long, trouble-free life.Please contact us for current pricing and availability.
-
CF364 36" Power Trowel offers precision handling for the professional concrete finisher and include patented features not available on any other brand. * Powered by Honda GX240 * 4 Blade with combination blades * Positive blade positioning, infinitely variable blade leveler * Contoured adjustable handle. * Lightweight Edger Trowel with a cast aluminum rotating edger ring that allows the trowel to run along walls without scuffing or gouging. * Dynamically balanced with a low center of gravity provides stability and smooth operation. * Patented Dyna-Clutch® safety feature stops blade rotation independent of the engine for safe operation. * * Adjustable body contoured handle with cushioned hand grips provide comfort and control for any operator. * Comes assembled and balanced from the factory. Please contact us for current pricing and availability. -
14" Gasoline cutoff saw for cutting concrete or steel. The TS 420 is so popular, it could possibly be called “the standard” to which other cut-off machines are compared. Users like it because it is compact, lightweight, reliable and proves itself day in and day out, all day long. The TS 420 features all the high-performance features of the TS 410 – including an X2 air filtration system for a clean and smooth-running engine and virtually maintenance-free filters. With the added benefit of a 14” cutting wheel, it will handle cuts up to 4.9 inches in depth. This cut-off machine backs up its larger cutting capacity with a ton of usability features. Please contact us for current pricing and availability. -
14" 11HP gas walk behind street saw. SK14 11HP Honda, wgt.173 lbs.Used for cutting concrete or asphaltPlease contact us for current pricing and availability.
-
The standard high-strength, high-density polyethylene bucket is the industry’s thickest and most durable. And standard features like heavy-duty hydraulic wheel motors, steel raceways for hydraulic hose protection and optional foam-filled tires ensure the AR16 power buggy will operate for the duration under tough conditions.Please contact us for current pricing and availability.
-
- Ice Pack for added cooling effect
- 4-Way airflow with auto vertical louver and manual horizontal louver
- High efficiency 1/3 HP motor quiet fan operation
- Manual fill and garden hose attachment with float valve auto shut-off
- 3-Sided high efficiency rigid media pads
- Ideal for indoor and outdoor spaces up to 1300 sqft
-
- The Bobcat E20 compact excavator is a zero-tail swing machine in the size class of 1-to-2 metric tons. Its zero tail-swing design gives you better maneuverability with minimal repositioning.
- Hydraulically retract the undercarriage to just 39 inches to traverse property lines, gates and other challenging access points, then return the undercarriage to a width of 53½ inches for great jobsite performance.
- Operating Weight 4,306 lb
- Maximum Reach at Ground Level 167.9"
-
• Perfect for small footings, bases, patching, fence post • Thick polyethylene drum - Resists rust and dents • 3 cf mixing capacity